24小时服务热线:400-0161-681 |
Laboratory instrumentation can replace traditional high-pressure cylinders. The nitrogen-hydrogen air source can be used alone or at the same time. It can be used intermittently or continuously, and the purity of the produced gas is not attenuated.
♦ The operation is simple, just start the power switch to produce gas, the output flow is stable, and the equipment is fully automatically tracked.
♦ Nitrogen is produced using the world's most advanced pressure swing adsorption (PSA) separation method, which replaces the traditional electrolyte chemical separation method. It is safe and easy to use, and it is non-corrosive to associated instruments and can be supplied in 24 hours.
♦ Hydrogen is produced by electrolysis of pure water using the world's leading SPE (PEM) technology, eliminating the need for alkaline solutions and eliminating the problem of recombination.
♦ The air is powered by a totally enclosed silent compressor, which purifies the natural air to remove moisture, oil, and impurities from the air. The stable and clean air is output through the voltage regulator and the noise is low.
型号 | QL-NHA300 | ||
Gas name | Nitrogen | hydrogen | air |
Output flow(ml/min) | 0-300 | 0-300 | 0-1000 |
Output pressure(MPa) |
0-0.4 |
||
Gas purity (%) | 99.99 | 99.999 |
Water content 0.204ppm |
Input power (W) |
<350 |
||
Supply voltage (V) |
AC 220 50-60Hz |
||
Total weight (kg) |
55 |
||
Dimensions (LxWxH)mm | 440x400x475 |